Sense Extra Button is an extra OK button that can be placed in more accessible location if the Sensor unit OK button is in too difficult location for the user. The Sense Extra Button operates with wireless connection to the Sense Stove Guard and is powered by CR2032 battery. Sense Extra Button can be attached on any magnetic metal surface as it has magnets to hold it in place.
Instructions how to pair the Sense Extra Button with Sense Stove guard:
1. Remove the battery insulation slip to power the Sense Extra Button
2. Press the Sense Extra Button extra buttons 1 & 2 simultaneously for 5 seconds or as long the Sense Extra Button indicator LED turns green to turn the pairing mode on
3. Turn the Sense Stove Guard Power Control Unit power off and wait 10 seconds
4. Turn the Sense Stove Guard Power Control unit power back on. You should hear the Sense Sensor unit beep three times and blink green.
5. To test the Sense Extra Button, press the Sense Extra Button OK button and check that the Sense Sensor unit beeps and blinks green once.